In this post, you’ll learn some great GoPro tips and tricks for beginners.
Table of Contents
GoPro Tips and Tricks for Beginners
Here’s what we’ll cover in the post:
- Use Red Filters for Better Underwater Photography
- Create Rotating Time Lapse Videos with a Kitchen Timer
- Buy Just One Mount
- Underwater Shooting Setting
- High Frame Rates Require Good Lighting
- Use the GoPro App For Social Sharing and Better Composition
- Shoot at 24 FPS in Low Light Settings
- In Low Light Settings, Shoot Close to the Nearest Light Source
- Understand Your GoPro’s Resolution and Field of View
- 3 Tips to Manage Your GoPro Batteries
- Use a Gimbal for Smoother Shots (here’s the best one)
- Shoot in the Highest Resolution Possible
- Use GoPro Edit Templates for Fast Video Editing
- Eliminate GoPro Lens Fog
- How to Shoot a Drive-lapse Video
- How to Shoot a Sunset Time lapse Video
16 GoPro Tips and Tricks (for Beginners)
In this post, you’ll hear from 11 GoPro photographers. They are travel bloggers, tour operators, handboarders, and professional content creators.
Have a tip to share? Join us in the comments below!
1. Use Red Filters for Better Underwater Photography
GoPro Photographer Bio: Ashley of My Wanderlusty Life is a travel blogger based in Boston, Massachusetts.
One thing I wish I knew from the start was the need for red snorkel filters for better underwater photography.
Without them, what happens under the water is almost indistinguishable as it’s all just a blue-green mass.
With the snorkel and diving filters (the shade of red depends on your depth) what you see on camera is just how you see it with your eyes: vibrant, natural colors as if the water is crystal clear.
Here’s a post full of underwater photography (with GoPro video at the end): Snorkeling in Belize
2. Create Rotating Time Lapse Videos with a Kitchen Timer
GoPro Photographer Bio: Josh Summers is a Texan living in Xinjiang, China with his wife and son. He blogs at Far West China.
One of the best accessories I ever bought for my GoPro is a simple kitchen timer, the kind that you spin to get started.
Put a sticky mount to the timer, set the GoPro to timelapse mode and then spin to get going.
The motion adds a beautiful new dimension to time lapse shots and best of all, the egg timer usually only costs less than $10!
3-4. Buy Just One Mount, Underwater Shooting Setting
GoPro Photographer Bio: Avichai Ben Tzur is based in Tel Aviv. He’s the publisher of X Days In Y, a travel website offering in depth travel guides to popular and exotic destinations around the world. Connect with Avichai on Facebook.
I recently returned from a 6 month trip to the remote South Pacific Islands, the primary reason for buying a Hero 4 Silver.
I was mostly looking for a way to capture the underwater scenery (see following video), but ended up using the camera to take time lapse videos over volcanoes and from mountaintops (see video below).
My main reason for getting a Hero4 Silver was to take underwater shots when diving and snorkeling.
If this is your case as well, I highly recommend getting a red filter for the lens. It compensates for the color distortion in salt water and leads to beautifully clear shots that depict the true underwater colors.
Read more: How to use a GoPro underwater
Watch on YouTube
Watch on YouTube
3. Buy Just One Mount (GoPro’s 3-Way): When starting out, it’s very tempting to purchase a lot of accessories.
Unless you’ll be skydiving, my advice would be simply to buy GoPro’s 3-in-1 mount which can be used as a camera grip, extension arm or tripod.
It covers the most popular necessities such as selfies, underwater photography and beautiful night shots/time lapse videos using the tripod.
4. Shoot Underwater Photos in Time Lapse Mode (2 seconds): When you’re using a GoPro to take underwater shots (not videos), set the camera to take multiple shots in short intervals.
Hero4 Silver Tip: my recommendation is 2 seconds which still allows for screen display so you can see what you’re shooting
Remember: you must be pretty much completely still for the shot to come out clearly so taking a few consecutive shots increase the chances of that happening.
5. High Frame Rates Require Good Lighting
GoPro Photographer Bio: Michelle Michalak is a handboarder based in San Diego and represents the Slyde Handboards Team across social media.
I wish I knew how important lighting was when using GoPro.
Tip: Lighting is key for not only your quality, but your frame rate. If you want to shoot a high frame rate, like 120 or 240 frames per second, you absolutely need good lighting.
Read more about GoPro settings.
Here are some on-camera settings for using your GoPro in the water.
Watch on YouTube
Check out Slyde Handboards on Amazon.com
6. Use the GoPro App For Social Sharing
GoPro Photographer Bio: Patryk is a digital nomad currently in Prague, Czech Republic and blogs with his wife at karolinapatryk.com
I wish I knew that GoPro is so easily managed by phone. It (GoPro Hero4 Black) doesn’t have a screen, so it was really challenging for me to take a photo at the beginning.
Now, thanks to GoPro app, I can see the full landscape before taking a picture. I can also download it on my phone and post in on Facebook or Instagram right away!
Improve Composition with the GoPro App
GoPro Photographer Bio: Tanbay is a luxury travel blogger at travellingweasels.com.
My tip is for all GoPros without a screen (we use the 3+): Use the app to connect to your Gopro so you can see what you’re filming.
This might be obvious to some, but it can make a difference depending on what you are filming.
See some of my work in this video.
7-8. Shooting in Low Light Settings
This tips is thanks to Julie Evans on behalf of ProEditors – the video editing solution that transforms raw point-of-view camera footage into professionally edited movies that are easily shared with friends.
7. Shoot at 24 FPS in Low Light Settings If you’re shooting in a low light setting, set your frame rate to 24 FPS (frames per second).
This will allow more light to reach your camera’s sensor. The lower the number, the better your camera will perform in low light.
8. Shoot Close to the Nearest Light Source If there is no significant light source nearby, use a flashlight (your phone might even do) to improve the lighting.
9. Understand Your GoPro’s Resolution and Field of View
GoPro Photographer Bio: Dylan runs a San Francisco tour agency called Orange Sky Adventures. He uses a GoPro Hero 3+ for the majority of their web shots.
For new GoPro users, I would recommend learning the difference between 1080, 2.7k and 4K, and knowing how each setting affects your shot. Narrow, Wide and SuperView angles are equally important.
Basically, when a shot comes up in the field – whether it’s a bug up-close or a sunset in the distance – you need to know which setting works best.
Nothing is worse than recording an awesome clip, only to see it’s not-so-awesome in replay. To learn, you can watch YouTube tutorials, or better yet, practice in real life. You’ll be a pro in no time.
Here’s a vid we’re soon to drop. It’s shot entirely with GoPro 3+.
Watch on YouTube
10-12. Managing GoPro Batteries, Gimbal, Resolution Settings
GoPro Photographer Bio: Ryan runs HD Carolina an agency that films things to see and do in the Carolinas. His suggestions are based on the Hero4.
We use the GoPro with a lot of the filming we do for our episodes about things to see and do in the Carolinas:
10. Managing GoPro Batteries
For this, I recommend the following:
- Be mindful of keeping things like WiFi on when you don’t need it as this will constantly drain the battery.
- Get extra batteries and keep them handy as your GoPro is useless without a charge.
- I also carry a large external USB charger (e.g. a Jackery) in my bag so that I can charge things from that as well.
Here’s how to extend battery life.
11. Use a Gimbal for Smoother Shots
There are several out on the market that vary in price. For GoPro, probably the obvious choice is their gimbal – the Karma Grip.
12. Shoot in the Highest Resolution Possible
Always film in the highest resolution possible (4k for the Hero 4).
You can always reduce it down in post processing and, if you don’t use a gimbal, you can use the extra resolution to software stabilize a shot if you are reducing it down to a lower resolution (e.g. 4k to HD).
13. Use GoPro Edit Templates for Fast Video Editing
GoPro Photographer Bio: Dena is half of the team here at Click Like This where we blog all about how to use your GoPro.
The templates are free and are used inside of GoPro Studio (also free).
Just choose the template you like and insert your clips. It’s super easy.
And here’s an example of a video I created – in just a few minutes – using a template.
Watch on YouTube
14-16. Eliminate Lens Fog, Shoot a Drive-lapse and Sunset Time lapse
GoPro Photographer Bio: This tip is mine (Bryan). I’m the other half of the Click Like This team.
14. Eliminate GoPro Lens Fog with Anti-Fog Inserts
Humidity inside the case can condense and cause photo-ruining fog.
It’s actually pretty easy to fix. Just drop in a couple of anti-fog inserts and you’ll eliminate GoPro lens fog.
You can get these inserts from GoPro or another company. I’ve been using CamKix inserts for a couple of years – with great success.
15. How to Create a GoPro Driving Timelapse
I’m a pretty big fan of time lapse video. Just a few months before we moved back to Canada from Ecuador, I shot a driving time lapse video in Cuenca.
Here are the settings I used to compress 2 hours into 7.5 minutes.
- Camera settings: I shot one image per second (60 images / minute) at 5MP resolution.
- Choose a great location: We were first to board the bus and chose the front seats on the upper level of the double-decker bus. I mounted the camera on the front of the bus, centered horizontally. I aimed the camera straight ahead, with a slight downward angle. Because it was on the front of the bus, there were no distracting people walking by.
- Gear Used: GoPro Hero3 Silver mounted on a Pedco Ultra Clamp. I used two batteries (Wasabi) during this shoot. The first lasted about 80 minutes. The second finished out the final 30 minutes of the tour.
- Mount the camera securely: To keep the camera steady, I rely on my Ultra Clamp mount. Read my Ultra Clamp review.
- Watch the battery: Don’t worry about sticking your head into the occasional image. It’s better to delete a few images than run out of battery and not realize it. It is easy to remove a few spoiled images – and it won’t affect the final product at all. I changed the battery while the bus stopped at a look-off point over the city.
Watch on YouTube
See the full post with all my specs.
16. How to Create a GoPro Sunset Timelapse
After I created my first sunset time lapse video (Isabela Island, Galapagos), I fell in love with them. They capture the moment like nothing else.
To create a sunset time lapse video, you’ll need four things:
- A steady tripod. I favor the Gorillapod SLR. It is stable enough for a heavy DSLR – so it doesn’t budge with a GoPro.
- A GoPro camera Any version will work. This video was shot with the Hero4 Black.
- Charged batteries. You should bring an extra one or two. This was shot with Wasabi batteries.
- A great location. It’s hard to beat the Bay of Fundy (Nova Scotia) for a sunset. Morden is a family favorite. We shot this footage while having a fire on the beach. You can see the occasional puff of smoke drift across the video (from left to right).
Check out the full post with all the specs. Here’s the final product:
Watch on YouTube
And there you have it: 16 GoPro tips and tricks for beginners.
Are you struggling with your GoPro? Ask your question below. Have a tip or trick? We would love to hear it!